Anti-Skid Spikes

Clark Tracks technical department can advise on options and possibilities.

Anti-Skid spikes are designed to stop the forest machine sliding sideways when crossing side slopes. They are normally between 40mm and 50mm in height, depending on track model, one spike per plate alternating left and right from track plate to track plate.
Spikes are available in a range of sizes for welding to forest tracks. Manufactured from heat treated boron alloy steel which is easily welded, these spikes combine hardness with strength. Make sure to read our Welding instructions

Depending on track model and expected usage, the following options may be available.

1. No spikes at all - for level ground and forest roads
2. Two spikes per plate (one each side)
3. Higher and lower height spikes (40mm, 50mm and 60mm in stock)
4. Spikes welded to different position on track plate
5. Paddle Spikes – 100mm wide by 50mm high – for ultimate climbing
6. Road Spike – where the spike is at the outside of the plate, above the link.

Spikes are available in a range of sizes for welding to tracks. Manufactured from heat treated boron alloy steel which is easily welded, these spikes combine hardness with strength.